Paint by Numbers: How to Cover Dark Lines and Numbers With Light Colors

By

·

Fine brush painting pale yellow over a numbered section of a canvas

It’s the most common paint by numbers frustration: you fill a section with white, cream or pale yellow, and the printed number and dark outline still peek through. Light colors are naturally less opaque, but with the right technique you can cover them completely.

Why light colors don’t cover well

Pale pigments let more light through, so anything dark underneath shows. Watery paint makes it worse. The fix is mostly about paint thickness, the number of coats and the order you paint in.

6 techniques that work

1. Paint thin layers, let each one dry

Two or three thin coats cover better than one thick coat, which tends to stay patchy and crack. Wait until each coat is dry to the touch (usually 10 to 20 minutes) before the next.

2. Don’t thin light paints with water

Keep white and pale colors at a creamy consistency. If a pot is thick, add only a tiny drop of water (see how to keep paint from drying out).

3. Paint light areas first

Working from light to dark means any slips onto neighboring sections get covered later by darker colors, not the other way around.

4. Use a base coat of white

For stubborn spots, paint a thin layer of white first, then the light color on top. White has the strongest coverage of any kit color. If you run low, a small bottle of white craft acrylic is cheap and useful to have.

5. Dab instead of stroke over numbers

Close-up of a fine brush filling a small numbered area on a canvas

Long strokes drag paint thin over the printed ink. Gently dabbing a loaded brush on the number deposits more paint exactly where you need it.

6. Paint just inside the lines

Use a fine brush and paint slightly over the outline from the darker side, so the line disappears under the darker neighbor rather than the light color.

Before you start: a pencil trick

Some crafters lightly erase very dark numbers in pale areas with a soft eraser before painting, after noting the number on the reference sheet. Test in a corner first, as some canvases smudge.

Still showing through when it’s finished?

Go back with one more thin coat. Light colors often look covered when wet and then dry slightly translucent, so check again the next day. A final coat of varnish also evens out the finish (see how to frame and varnish a paint by numbers canvas).

More technique tips in paint by numbers tips: brushes, layers and fixing mistakes.

Frequently asked questions

How many coats does white need?
Usually two or three thin coats over printed numbers.

Can I use white gesso?
Yes. Gesso is very opaque and works well as a base under light colors.

Leave a Reply