·

How to Frame a Diamond Painting (Step by Step)

By

·

A framed floral diamond painting hanging on a living room wall

After hours of placing drills, your diamond painting deserves a proper spot on the wall. Framing protects it from dust and knocks and makes it look like real art. Here’s how to do it, plus a few easy alternatives.

Nearly finished diamond painting with a drill pen, tray, wax and jars of drills

What you’ll need

  • A frame that fits the design area (or the full canvas, if you want to show the border)
  • A sturdy backing board (foam board or the frame’s backboard)
  • A roller or clean rolling pin
  • Scissors or a craft knife and a ruler
  • Double-sided tape or spray adhesive (optional)

Step 1: Prepare the finished canvas

  1. Check for missing or crooked drills and fix them.
  2. Lay the canvas face down on a clean towel and roll over the back, then flip it and roll firmly over the front so every drill is set.
  3. If the canvas is curled, lay it flat under heavy books overnight.
  4. Gently dust the surface with a soft brush.

Step 2: Choose the right frame

  • Measure the design area (the drilled part), not just the canvas. Most kits use standard sizes, so ready-made frames often fit.
  • Deep frames work best because drills add thickness.
  • Glass or no glass? Glass protects against dust but hides some sparkle. Many crafters skip the glass and seal the painting instead.
  • Pick a simple frame color (white, black or natural wood) so the design stays the star.

Step 3: Trim and mount

  1. Decide how much border to keep. Leave a little extra so you can fold it behind the backing board.
  2. Trim the canvas with a ruler and craft knife if needed.
  3. Center the canvas on the backing board and secure the edges on the back with tape, or use spray adhesive for a perfectly flat finish.

Step 4: Frame and hang

Place the mounted painting in the frame, close the back and check from the front that it’s straight. Hang it away from direct sunlight, which can fade colors over time.

Should you seal a diamond painting?

Sealing is optional. It helps if you frame without glass, if the canvas has lost some stickiness, or if the piece will hang in a humid room. Use a sealant made for diamond paintings, apply a thin, even coat with a soft brush, and let it dry fully before framing. Always test on a small corner first.

Alternatives to a traditional frame

  • Stretcher bars: wrap the canvas around wooden bars like a painting.
  • Poster hangers: magnetic wooden strips at the top and bottom for a modern look.
  • Foam board and wall tabs: a quick, budget-friendly option for smaller pieces.
  • Turn it into a gift: small pieces make lovely cards, coasters or tray inserts.

Still working on yours? Our beginner’s guide and round vs square drills guide can help.

Frequently asked questions

Can I use a standard picture frame?
Yes, if it’s deep enough for the drills and fits the design area.

How do I stop drills falling off?
Roll the canvas firmly before framing. Sealing adds extra protection.

Can I frame it with a mat?
Yes. A mat adds space around the design and looks very polished, especially with glass.

Leave a Reply